 |
2:1
SEMI-ELLIPTICAL DISH
Sizes 6-5/8" to 192" . From 3/16
to 2 inches thick. Tolerances comply with A.S.M.E.® requirements.
A.S.M.E. UG 32 (d). I.D. or O.D.
|
 |
A.S.M.E.® FLANGED &
DISHED
Standard and intermediate sizes 14 to 252
inches. From 3/16 to 1-1/8 inches thick. Tolerances comply
with A.S.M.E. requirements. A.S.M.E. UG-32 (e). I.D. or O.D.
|
 |
A.S.M.E.® 80-10 FLANGED &
DISHED
Sizes 14 to 252 inches diameter. From 3/16 to
1-1/8 inches thick. Tolerances comply with A.S.M.E.
requirements. A.S.M.E. 1-4 (d). I.D. or O.D. |
 |
A.S.M.E.® HIGH CROWN FLANGED &
DISHED HEADS
Standard and intermediate sizes between 14 to 240
inches diameter. From 3/16 to 1-1/8 inches thick. Tolerances
comply with A.S.M.E. requirements. I.D. or O.D.
|
 |
FLANGED & CONICAL DISHED
HEAD
From 24 to 192 inches diameter. 3/16 to 1-1/8
inches thick. Tolerances comply with A.S.M.E.® requirements.
A.S.M.E. UG-32 (h). I.D. or O.D.
|
 |
STANDARD FLANGED & DISHED
HEADS
Sizes 14 to 252 inches diameter. From 12 gauge
to 1-1/8 inches thick. Non-A.S.M.E.® I.D. or O.D.
|
 |
FLANGED & SHALLOW DISHED
HEADS
From 14 to 240 inches diameter. 3/16 to 1-1/8
inches thick. Non-A.S.M.E.® I.D. or O.D. |
 |
FLANGED ONLY
HEADS
Sizes 14 to 275 inches diameter. From 12 gauge
to 1 inch thick. I.D. or O.D. |
 |
DISHED ONLY
HEADS
When ordering, specify most important dimension -
outside diameter, crown radius or depth. Standard and intermediate
sizes 12 to 268 inches diameter can be readily supplied. From 12
gauge to 2 inches thick.
|
Key:
 | O.D.
— Outside Diameter |
| I.D. —
Inside Diameter
| Thk. —
Thickness (nominal or minimum)
| O.A.H. —
Overall Height
| I.H. —
Inside Height
| S.F. —
Straight Flange
| R. —
Radius
| D.R. —
Dish Radius
| I.K.R. or
I.C.R. — Inside Knuckle (or corner) Radius
| I.D.D. —
Inside Depth of Dish |
| | | | | | | |
|
FLARED & DISHED
HEADS
From 18 to 144 inches diameter. 12 gauge to 5/16
inches thick. Tolerances comply with A.S.M.E.®
requirements 1-6. |
